Denso Direct Fit Oxygen Sensor DOX-1459
Primarily used in HONDA cars and typically replaces original equipment sensors including part number 36531P1HE01.
A common application for this sensor would be HONDA CIVIC VI Hatchback (EJ, EK) 1.6 i (EK1) (199511 - 200102).
Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.
Refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.
Denso Direct Fit Oxygen Sensors, sometimes referred to as Lambda or O2 sensors or probes, are designed to be a 'plug and go' replacement for Original Equipment (OE) or competitor brand Oxygen sensors. This means you do not have to perform any cutting and reconnecting of cables, or need to reuse the original sensor connector. The correct connector for your vehicle's wiring loom is already attached to the direct fit replacement sensor.
Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.
Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors, or the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.
Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.
- Additional Information
Manufacturer Denso Cable Length [mm] 480 Manufacturer Restriction DENSO Number of Poles 4 Quality OE Thread Size M18x1.5 ArtNr DOX-1459 Number Of Wires 4 Resistor No Seat Type Threaded With Gasket Part Type Lambda Sensor
- Cross Reference
Manufacturer Part Number BOSCH 0258986612 BOSCH 0258986659 BOSCH LS31612 DELPHI ES20052-11B1 DELPHI ES20053-12B1 HONDA 36531P1HE01 HONDA 36531P2EA01 HONDA 36531P7AG01 HONDA 36531P7AG02 HONDA 36531P8CA01 HONDA 36532P5A003 HONDA 36532PR7A01 HONDA 36532PR7J01 HONDA 36532PR7J02 HONDA 36532PY3003 HONDA 36541PR7A01 HONDA 36541PR7A02 MAGNETI MARELLI 460000425010 MAGNETI MARELLI 460002140610 Meat & Doria 81076 NGK 0425 NGK 0439 NGK 93816 NGK OZA444-E1 NGK OZA502-E28 NGK OZA686-EE4 Standard / SMP / Intermotor 13224 Standard / SMP / Intermotor 64179 Standard / SMP / Intermotor 64447 Standard / SMP / Intermotor 64483 Standard / SMP / Intermotor LB1367 Standard / SMP / Intermotor LB1738 Standard / SMP / Intermotor LB1792 WALKER 25024093 WALKER 25024099
- Related Products