Denso Universal Oxygen Sensor DOX-0106

More Views

Denso Universal Oxygen Sensor DOX-0106
Excl. Tax: £37.45 Incl. Tax: £44.94

Availability: In stock

Denso Oxygen Sensor DOX-0106 Denso Universal Fit Oxygen Sensor (Lambda Sensor) part number DOX-0106

Description

Details

Denso Universal fit Oxygen Sensor DOX-0106

Primarily used in TOYOTA cars and typically replaces original equipment sensors including part number 89465-0D080.

A common application for this sensor would be TOYOTA COROLLA (_E12U_, _E12J_) 1.6 VVT-i (200201 - ).

Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.

Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.

Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.

Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.

Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.

Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.

Additional Information

Additional Information

Manufacturer Denso
Cable Length [mm] 750
Number of Poles 4
Quality OE
Thread Size M18x1.5
ArtNr DOX-0106
Number Of Wires 4
Resistor No
Seat Type Threaded With Gasket
Part Type Universal Lambda Sensor
Cross Reference
Manufacturer Part Number
DAIHATSU89465B1030
DENSODOX-0254
DENSODOX-0255
DENSODOX-0256
DENSODOX-0257
DENSODOX-0289
TOYOTA894650D080
TOYOTA894650D110
TOYOTA894650K010
TOYOTA8946502150
TOYOTA8946502310
TOYOTA8946505080
TOYOTA8946512710
TOYOTA8946512740
TOYOTA8946512750
TOYOTA8946512880
TOYOTA8946513030
TOYOTA8946520770
TOYOTA8946520780
TOYOTA8946520820
TOYOTA8946520830
TOYOTA8946522300
TOYOTA8946525040
TOYOTA8946526110
TOYOTA8946526120
TOYOTA8946528270
TOYOTA8946530710
TOYOTA8946530720
TOYOTA8946535700
TOYOTA8946535710
TOYOTA8946548130
TOYOTA8946548150
TOYOTA8946548160
TOYOTA8946550180
TOYOTA8946550190
TOYOTA8946552170
TOYOTA8946552250
TOYOTA8946552330
TOYOTA8946558090
TOYOTA8946558100
TOYOTA8946560220
TOYOTA8946560230
TOYOTA8946563040
TOYOTA8946563050
Related Products