Denso Universal Oxygen Sensor DOX-0115

More Views

Denso Universal Oxygen Sensor DOX-0115
Excl. Tax: £32.58 Incl. Tax: £39.10

Availability: Despatches in 1 - 2 business days, subject to availability

Denso Oxygen Sensor DOX-0115 Denso Universal Fit Oxygen Sensor (Lambda Sensor) part number DOX-0115

Description

Details

Denso Universal fit Oxygen Sensor DOX-0115

Primarily used in NISSAN cars and typically replaces original equipment sensors including part number 2269099B00.

A common application for this sensor would be NISSAN MICRA II (K11) 1.0 i 16V (199208 - 200009).

Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.

Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.

Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.

Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.

Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.

Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.

Additional Information

Additional Information

Manufacturer Denso
Cable Length [mm] 750
Number of Poles 3
Quality OE
Thread Size M18x1.5
ArtNr DOX-0115
Number Of Wires 3
Seat Type Threaded With Gasket
Part Type Universal Lambda Sensor
Cross Reference
Manufacturer Part Number
AUDI030906265AN
AUDI030906265C
AUDI030906265J
AUDI030906265N
AUDI030906265Q
AUDI034906265F
AUDI037906265
AUDI053906265
AUDI078906265B
BOSCH0258986502
BOSCH0258986504
DENSODOX-1351
DENSODOX-1378
DENSODOX-1379
DENSODOX-1381
DENSODOX-1500
DENSODOX-1593
DENSODOX-1594
FIAT7619303
FIAT7674048
FORD6196227
HYUNDAI3921022019
MERCEDES-BENZ0095423917
NISSAN226909F600
NISSAN226909F601
NISSAN2269099B00
OPEL855302
OPEL855306
OPEL855307
OPEL855322
OPEL855325
OPEL855337
OPEL855338
OPEL90509274
OPEL90541930
RENAULT7700101345
SEAT030906265AN
SEAT030906265C
SEAT030906265J
SEAT030906265N
SEAT030906265Q
SEAT034906265F
SEAT037906265
SEAT053906265
SEAT078906265B
SKODA030906265AN
SKODA030906265C
SKODA030906265J
SKODA030906265N
SKODA030906265Q
SKODA034906265F
SKODA037906265
SKODA053906265
SKODA078906265B
SUBARU22690AA740
VOLKSWAGEN030906265AN
VOLKSWAGEN030906265C
VOLKSWAGEN030906265J
VOLKSWAGEN030906265N
VOLKSWAGEN030906265Q
VOLKSWAGEN034906265F
VOLKSWAGEN037906265
VOLKSWAGEN053906265
VOLKSWAGEN078906265B
VOLVO3474457
VOLVO3501753
VOLVO3531400
Related Products