Denso Universal Oxygen Sensor DOX-0116

More Views

Denso Universal Oxygen Sensor DOX-0116
Excl. Tax: £27.98 Incl. Tax: £33.58

Availability: Despatches in 1 - 2 business days, subject to availability

Denso Oxygen Sensor DOX-0116 Denso Universal Fit Oxygen Sensor (Lambda Sensor) part number DOX-0116

Description

Details

Denso Universal fit Oxygen Sensor DOX-0116

Primarily used in VOLKSWAGEN GROUP cars and typically replaces original equipment sensors including part number 037906265B.

A common application for this sensor would be RENAULT MEGANE Scenic (JA0/1_) 1.6 e (JA0F) (199701 - 199909).

Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.

Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.

Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.

Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.

Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.

Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.

Additional Information

Additional Information

Manufacturer Denso
Cable Length [mm] 750
Number of Poles 3
Quality OE
Thread Size M18x1.5
ArtNr DOX-0116
Number Of Wires 3
Seat Type Threaded With Gasket
Part Type Universal Lambda Sensor
Cross Reference
Manufacturer Part Number
AUDI030906265
AUDI030906265AA
AUDI030906265AB
AUDI030906265F
AUDI030906265K
AUDI037906265B
AUDI037906265G
AUDI048906265
DENSODOX-1023
DENSODOX-1024
DENSODOX-1025
DENSODOX-1031
DENSODOX-1311
DENSODOX-1350
DENSODOX-1352
DENSODOX-1373
DENSODOX-1376
DENSODOX-1377
DENSODOX-1501
DENSODOX-1502
DENSODOX-1503
HYUNDAI3921022015
MAZDAB6DC18861A
MAZDAB31R18861A
MERCEDES-BENZ0095424117
NGK0412
NGKOZA624-E3
NISSAN226901N000
NISSAN226901N001
NISSAN226902F010
NISSAN226903J410
NISSAN2269073C00
NISSAN2269073C01
NISSAN2269076J00
RENAULT7700273273
RENAULT7700273715
RENAULT7700746375
RENAULT7700854148
RENAULT7700854506
RENAULT7700864987
RENAULT7700867295
RENAULT7700870318
RENAULT7700872878
RENAULT8200024503
SEAT030906265
SEAT030906265AA
SEAT030906265AB
SEAT030906265F
SEAT030906265K
SEAT037906265B
SEAT037906265G
SEAT048906265
SKODA030906265
SKODA030906265AA
SKODA030906265AB
SKODA030906265F
SKODA030906265K
SKODA037906265B
SKODA037906265G
SKODA048906265
SUZUKI1821356B00
VOLKSWAGEN030906265
VOLKSWAGEN030906265AA
VOLKSWAGEN030906265AB
VOLKSWAGEN030906265F
VOLKSWAGEN030906265K
VOLKSWAGEN037906265B
VOLKSWAGEN037906265G
VOLKSWAGEN048906265
VOLVO9135621
VOLVO9135794
Related Products