Denso Universal Oxygen Sensor DOX-0118

More Views

Denso Universal Oxygen Sensor DOX-0118
Excl. Tax: £32.58 Incl. Tax: £39.10

Availability: Despatches in 1 - 2 business days, subject to availability

Denso Oxygen Sensor DOX-0118 Denso Universal Fit Oxygen Sensor (Lambda Sensor) part number DOX-0118

Description

Details

Denso Universal fit Oxygen Sensor DOX-0118

Primarily used in BMW cars and typically replaces original equipment sensors including part number 11781247235.

A common application for this sensor would be VW GOLF III (1H1) 1.6 (199209 - 199708).

Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.

Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.

Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.

Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.

Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.

Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.

Additional Information

Additional Information

Manufacturer Denso
Cable Length [mm] 750
Number of Poles 4
Quality OE
Thread Size M18x1.5
ArtNr DOX-0118
Number Of Wires 4
Seat Type Threaded With Gasket
Part Type Universal Lambda Sensor
Cross Reference
Manufacturer Part Number
AUDI6U0906265B
AUDI021906265A
AUDI021906265AB
AUDI021906265BD
AUDI021906265N
AUDI023906265D
AUDI037906265AD
AUDI330906265
BMW11781247235
BMW11781247475
BMW11781433159
BMW11781714772
BMW11781716114
BMW11781720860
BMW11781721125
BMW11781730007
BMW11781734345
BMW11781734393
BMW11781735499
BMW11781735500
BMW11781735710
BOSCH0258986503
DENSODOX-1102
DENSODOX-1172
DENSODOX-1317
DENSODOX-1318
DENSODOX-1319
DENSODOX-1364
DENSODOX-1369
DENSODOX-1506
MERCEDES-BENZ0005405917
SEAT6U0906265B
SEAT021906265A
SEAT021906265AB
SEAT021906265BD
SEAT021906265N
SEAT023906265D
SEAT037906265AD
SEAT330906265
SKODA6U0906265B
SKODA021906265A
SKODA021906265AB
SKODA021906265BD
SKODA021906265N
SKODA023906265D
SKODA037906265AD
SKODA330906265
VOLKSWAGEN6U0906265B
VOLKSWAGEN021906265A
VOLKSWAGEN021906265AB
VOLKSWAGEN021906265BD
VOLKSWAGEN021906265N
VOLKSWAGEN023906265D
VOLKSWAGEN037906265AD
VOLKSWAGEN330906265
Related Products