Denso Universal fit Oxygen Sensor DOX-0110
Primarily used in TOYOTA cars and typically replaces original equipment sensors including part number 89465-80009.
A common application for this sensor would be TOYOTA PREVIA (TCR1_, 2_) 2.4 (199005 - 200008).
Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.
Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.
Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.
Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.
Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.
Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.
- Additional Information
Manufacturer Denso Cable Length [mm] 750 Number of Poles 4 Quality OE Thread Size Flange 44 ArtNr DOX-0110 Number Of Wires 4 Seat Type Flange Part Type Lambda Sensor
- Cross Reference
Manufacturer Part Number DAIHATSU 8946522170 DAIHATSU 8946522190 DAIHATSU 8946535300 DAIHATSU 8946540030 DENSO DOX-0223 DENSO DOX-0224 DENSO DOX-0226 DENSO DOX-0227 DENSO DOX-0228 DENSO DOX-0229 TOYOTA 8946519595 TOYOTA 8946519605 TOYOTA 8946519755 TOYOTA 8946529675 TOYOTA 8946529715 TOYOTA 8946529825 TOYOTA 8946539735 TOYOTA 8946539755 TOYOTA 8946539825 TOYOTA 8946539835 TOYOTA 8946539855 TOYOTA 8946539895 TOYOTA 8946549045 TOYOTA 8946569085 TOYOTA 8946569175 TOYOTA 8946580004 TOYOTA 8946580009 TOYOTA 8946580011 TOYOTA 8946580028 TOYOTA 8946580034 TOYOTA 8946580035