Denso Universal fit Oxygen Sensor DOX-0115
Primarily used in NISSAN cars and typically replaces original equipment sensors including part number 2269099B00.
A common application for this sensor would be NISSAN MICRA II (K11) 1.0 i 16V (199208 - 200009).
Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.
Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.
Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.
Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.
Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.
Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.
- Additional Information
Manufacturer Denso Cable Length [mm] 750 Number of Poles 3 Quality OE Thread Size M18x1.5 ArtNr DOX-0115 Number Of Wires 3 Seat Type Threaded With Gasket Part Type Lambda Sensor
- Cross Reference
Manufacturer Part Number AUDI 030906265AN AUDI 030906265C AUDI 030906265J AUDI 030906265N AUDI 030906265Q AUDI 034906265F AUDI 037906265 AUDI 053906265 AUDI 078906265B BOSCH 0258986502 BOSCH 0258986504 DENSO DOX-1351 DENSO DOX-1378 DENSO DOX-1379 DENSO DOX-1381 DENSO DOX-1500 DENSO DOX-1593 DENSO DOX-1594 FIAT 7619303 FIAT 7674048 FORD 6196227 HYUNDAI 3921022019 MERCEDES-BENZ 0095423917 NISSAN 226909F600 NISSAN 226909F601 NISSAN 2269099B00 OPEL 855302 OPEL 855306 OPEL 855307 OPEL 855322 OPEL 855325 OPEL 855337 OPEL 855338 OPEL 90509274 OPEL 90541930 RENAULT 7700101345 SEAT 030906265AN SEAT 030906265C SEAT 030906265J SEAT 030906265N SEAT 030906265Q SEAT 034906265F SEAT 037906265 SEAT 053906265 SEAT 078906265B SKODA 030906265AN SKODA 030906265C SKODA 030906265J SKODA 030906265N SKODA 030906265Q SKODA 034906265F SKODA 037906265 SKODA 053906265 SKODA 078906265B SUBARU 22690AA740 VOLKSWAGEN 030906265AN VOLKSWAGEN 030906265C VOLKSWAGEN 030906265J VOLKSWAGEN 030906265N VOLKSWAGEN 030906265Q VOLKSWAGEN 034906265F VOLKSWAGEN 037906265 VOLKSWAGEN 053906265 VOLKSWAGEN 078906265B VOLVO 3474457 VOLVO 3501753 VOLVO 3531400
- Related Products