Denso Universal fit Oxygen Sensor DOX-0118
Primarily used in BMW cars and typically replaces original equipment sensors including part number 11781247235.
A common application for this sensor would be VW GOLF III (1H1) 1.6 (199209 - 199708).
Note that the figures in brackets denote the year and month of manufacture. Also fits other models, please use the 'lookup' on our homepage or on Denso's website. We strongly recommend cross referencing the original equipment (OE) sensor to the Denso aftermarket part in order to confirm suitability. See the CROSS REFERENCE tab for details. Contact us if you need help with this.
Please also refer to the ADDITIONAL INFORMATION tab for details of cable length and number of wires. Please visit the Denso Aftermarket website if you wish to identify suitable parts by vehicle registration (VRM) lookup.
Denso Universal Fit Lambda Sensors, sometimes referred to as universal Oxygen or O2 sensors or probes, require utilising your original sensor electrical connector. Universal sensors are supplied with an excess of cable which needs to be cut to a suitable size for your vehicle and the connector for your original sensor can then be carefully spliced to the new sensor's cables using the insulated crimp connectors supplied or by soldering if preferred.
Flange fitting type sensors are supplied with a gasket if required and sensors with a threaded fitting are either pre greased at the factory or are supplied with a sachet of suitable grease.
Simply disconnect your existing sensor from the vehicle's wiring loom, this is usually located in the engine bay and, using a suitable tool such as a Laser Lambda sensor socket for M18 threaded sensors and the correct sized socket for sensors with flange fitting, carefully remove the existing sensor. Using the same tool, install the new sensor core, taking care not to damage the cables or the sensor body, connect back into the wiring loom and you're good to go.
Note that some vehicles may require an ECU reset in order to recalibrate engine management systems for the new sensor, this usually entails disconnecting the battery for a number of hours, overnight is usually sufficient.
- Additional Information
Manufacturer Denso Cable Length [mm] 750 Number of Poles 4 Quality OE Thread Size M18x1.5 ArtNr DOX-0118 Number Of Wires 4 Resistor No Seat Type Threaded With Gasket Part Type Lambda Sensor
- Cross Reference
Manufacturer Part Number AUDI 6U0906265B AUDI 021906265A AUDI 021906265AB AUDI 021906265BD AUDI 021906265N AUDI 023906265D AUDI 037906265AD AUDI 330906265 BMW 11781247235 BMW 11781247475 BMW 11781433159 BMW 11781714772 BMW 11781716114 BMW 11781720860 BMW 11781721125 BMW 11781730007 BMW 11781734345 BMW 11781734393 BMW 11781735499 BMW 11781735500 BMW 11781735710 BOSCH 0258986503 DENSO DOX-1102 DENSO DOX-1172 DENSO DOX-1317 DENSO DOX-1318 DENSO DOX-1319 DENSO DOX-1364 DENSO DOX-1369 DENSO DOX-1506 MERCEDES-BENZ 0005405917 SEAT 6U0906265B SEAT 021906265A SEAT 021906265AB SEAT 021906265BD SEAT 021906265N SEAT 023906265D SEAT 037906265AD SEAT 330906265 SKODA 6U0906265B SKODA 021906265A SKODA 021906265AB SKODA 021906265BD SKODA 021906265N SKODA 023906265D SKODA 037906265AD SKODA 330906265 VOLKSWAGEN 6U0906265B VOLKSWAGEN 021906265A VOLKSWAGEN 021906265AB VOLKSWAGEN 021906265BD VOLKSWAGEN 021906265N VOLKSWAGEN 023906265D VOLKSWAGEN 037906265AD VOLKSWAGEN 330906265
- Related Products