Open: 9am - 4pm MON - FRI
DPF Fuel Vaporiser Spanner 22mm For Ford
The 8100 has been developed specifically for the removal of the DPF fuel vapouriser injector (Ford OE number 1940311) retaining nut on the Ford Transit Custom where access is very restricted. It is recommended that the 8100 is used with the Laser 4590 hand impact wrench. The 22mm fuel vapouriser is used across the Ford diesel range, but not all have such poor access as the Transit Custom models. Where access permits, this spanner can also be used with 1/2 drive ratchet. NOTE: Vacuum test the vapouriser using Laser Part No. 3752 or similar -if the vaporiser holds a vacuum, it is blocked.
- Super slim fit for access; 22mm across the flats, 6 point crows foot with 1/2 drive.
- Applications include: Ford 1.6, 2.0 and 2.2L Duratorq TDCi engines from 2012 onwards (EURO 6 engines).
- Vapouriser failure is often indicated by ECU fault codes P244C or P26A1.
- For best results use with Laser 1/2D hand impact wrench (Part No. 4590).
- Made in Sheffield.
Please choose a suitable shipping method based on urgency and whether you require tracking information.
Despatch schedules:
In Stock Items:
Please place your order for In Stock items before 4PM (Royal Mail) or 11AM (FedEx courier) to ensure despatch is made the same day. Orders placed after these cut off times may not be despatched until the next working day.
Available to order/Available from supplier in 2 days:
Not physically in stock but availability has been confirmed with our suppliers within the last 24 hours.
NonStock Items/Backorders:
Non stock items will be placed on order as soon as possible and will be despatched as soon as available.
Partial Stock:
Where we have some, but not all, of the stock required to fulfil your order it will be placed on hold until your complete order can be despatched.
Laser Tools DPF Fuel Vaporiser Spanner 22mm - for Ford
